Although many new frames favor press-fit type bottom bracket standards, there are certainly still many new or existing performance road bikes that have a BSA threaded bottom bracket shell. Cyclists with these bikes can upgrade to the top quality upgrade available. Ceramic Speed bottom bracket models save you watts and energy by reducing friction with every turn of your crankset. The science and testing behind the efficacy and benefits of ceramic bearings is definitive, but all ceramic bearings are not made the same. Ceramic Speed bearings are harder, perfectly round, and widely surpass the quality standards of most ceramics on the market. With average lifespans of 3-5 times that of high-quality steel bearings, these Silicon Nitride offerings from the Danish company pay for themselves over time in longevity alone, never mind the mechanical and performance benefits gained. If you are a competitive cyclist or triathlete who seeks every component, accessory, and bike advantage, invest in the proven friction reduction of Ceramic Speed.

BSA standard threaded road frames use a 68mm wide BB shell. This model was designed for only for 30mm crank spindles, such as those used by Rotor and a few others. The aluminum shells and interfaces to each specific system, and Ceramic Speed supplies two 1mm spacers and, and two .5mm spacers along with dust covers for this bottom bracket. The 16 notch 44mm OD original Shimano/SRAM cup interface is used so Park's BBT-9, BBT-19 or other 16 notch tools should be used for installation. Ceramic Speed's bearings ride in composite carriers and high-quality, steel races. The ceramic balls are polished to perfect smoothness, and should they make contact with a race, they won't damage it, but will actually serve to clean and eliminate any surface issues inside the race. Lubrication is specific to the Ceramic Speed system, as are the bearing seals. A syringe of the grease lubricant comes with the bottom bracket. Detailed instructions for installation and service come with the bottom bracket and can also be found on Ceramic Speed's Cycling website.

Properly installed, your bottom bracket should not creak or make noise. The crankset will spin freely, with the absolute minimum resistance. Machining and hand-assembly is done in Denmark, with each part and the final assembly thoroughly inspected before shipping to distributors. The 84 gram bottom bracket delivers performance far in excess of standard options on the market. Save watts and energy with every pedal stroke as you optimize your equipment to fully realize your human potential with the Ceramic Speed BSA30 Road Ceramic Bottom Bracket.