800.627.6664
*Free shipping on orders over $99
X

Free Shipping Policy

Free Shipping applies to all orders placed for $99 and above
(pre-tax value). Some restrictions apply:

  • Offer valid in the Lower 48 States only
  • Excludes Complete Bicycles, Framesets, and some other oversize items
  • Excludes certain sale items

Filters

Description

The Dura-Ace FC-9000 chainrings work with Shimano's 9000 and 6800 110mm four-arm asymmetric cranks. One of the nice features of Shimano's new 4 arm 110mm asymmetric bolt circle is the same for compact, standard and TT so this means that one crankarm fits all chainring sizes. If you move from the flats to the hills or try different events, you can keep the same crank and just change the chainrings.

When changing to different size chainrings, you will want to keep the difference between the inner and outer chainrings to 16 teeth or less. The outer ring is generally matched to a specific inner ring in terms of the position of the lifting pins and tooth profile. If you typically run a 52/38 for example and want to use a 36 for a hilly event, you will generally be okay with the same outer chainring. Keep in mind, you will generally need to shorten the chain when going from standard to compact or lengthen the chain when going from compact to standard or TT rings.

Return to Top
Features

  • 4-arm 110mm asymmetric bolt circle
  • Hollowglide construction (outer rings)
  • Same bolt circle for all chainrings

Only works on Shimano 4-arm asymetric 110mm cranks like 9000 and 6800

Return to Top